TN L's Journal
Found a 1972 MGB. Mechanically, in fairly good condition, but it needed some work done. There had been some indifferent maintenance done in the recent past. For example, the brake pads were recent, but the disks had not been machined in the last brake job and were not smooth. A Weber carburetor was installed, but mounted badly. I also did some things not needed in the short term, like replacing engine seals.
Car is running great.
The car was painted a few years ago and most of the paint job is good. Sections of it are not so good, especially on the bottom half of the car. Paint is chipped in a few palaces. It turns out to be the same red as my Miata MX-5 --- I was not expecting that. Most people in the car paint business that I have talked to say Mazda copied the MG paint, so it is an MG color and not just painted using Mazda paint. I think buffing with a good polishing compound in some sections will make improvements. Also, my Mazda touch up paint will work.
No rust! This is the greatest advantage. Engine is sound and runs well. Distributor was rebuilt three months ago by Jeff Schlemmer (I have the receipt). I had a good MG mechanic go over the car.
Most annoying problem is the way I think the car was put together after being painted, mostly with a lot of indifference. Marker lights were backwards on one side and correct on the other. Passenger door lock plates were mounted with stripped screws. These things will take time to go through. Rivets were used as connectors rather than screws in a lot of places. For example, the glove box lock needs replacing, but it is installed with rivets, making the replacement more difficult.
The worst so far is that one of the wire wheels was in such bad shape that, had I known this, I would have never driven it at the time.
The last owner could not care for the car for health reasons. The one before that is a little bit of a mystery. The one before that put all the restoration work in to the car around 2001 - 2002, the results of which I am seeing now. I have all the records from the restorer owner.
Lets call it a driving re-restoration car.
Car is running great.
The car was painted a few years ago and most of the paint job is good. Sections of it are not so good, especially on the bottom half of the car. Paint is chipped in a few palaces. It turns out to be the same red as my Miata MX-5 --- I was not expecting that. Most people in the car paint business that I have talked to say Mazda copied the MG paint, so it is an MG color and not just painted using Mazda paint. I think buffing with a good polishing compound in some sections will make improvements. Also, my Mazda touch up paint will work.
No rust! This is the greatest advantage. Engine is sound and runs well. Distributor was rebuilt three months ago by Jeff Schlemmer (I have the receipt). I had a good MG mechanic go over the car.
Most annoying problem is the way I think the car was put together after being painted, mostly with a lot of indifference. Marker lights were backwards on one side and correct on the other. Passenger door lock plates were mounted with stripped screws. These things will take time to go through. Rivets were used as connectors rather than screws in a lot of places. For example, the glove box lock needs replacing, but it is installed with rivets, making the replacement more difficult.
The worst so far is that one of the wire wheels was in such bad shape that, had I known this, I would have never driven it at the time.
The last owner could not care for the car for health reasons. The one before that is a little bit of a mystery. The one before that put all the restoration work in to the car around 2001 - 2002, the results of which I am seeing now. I have all the records from the restorer owner.
Lets call it a driving re-restoration car.
ATT00001-2
No comments have been posted yet...
Want to leave a comment or ask the owner a question?
Sign in or register a new account — it's free