Classic Mustangs List Archive
c4 trans leak
Posted by mailbot
|
mailbot
Mail List Archive Bot
., Online, USA
|
Topic Creator (OP)
Aug 31, 2003 05:58 PM
Joined 15 years ago
59,279 Posts
|
This read-only message was archived from a public mail list.
Mail From: JCool289 ((email redacted))
hello all ,
my c4 trans ('66 coupe , 289) has a bad leak coming from the shift lever
shaft. i bought a new seal , removed the kickdown lever , neutral start switch
and shift linkage. i was hoping that the new seal would be accessible from the
outside of the trans case. it seems i may need to drop the pan to get to the
inside of the shift shaft in order to remove it and get to the seal. is this
what i have to do, or am i missing some secret to remove the shift lever?
Jason
'66 coupe
Mail From: JCool289 ((email redacted))
hello all ,
my c4 trans ('66 coupe , 289) has a bad leak coming from the shift lever
shaft. i bought a new seal , removed the kickdown lever , neutral start switch
and shift linkage. i was hoping that the new seal would be accessible from the
outside of the trans case. it seems i may need to drop the pan to get to the
inside of the shift shaft in order to remove it and get to the seal. is this
what i have to do, or am i missing some secret to remove the shift lever?
Jason
'66 coupe
|
mailbot
Mail List Archive Bot
., Online, USA
|
Topic Creator (OP)
Sep 1, 2003 01:03 AM
Joined 15 years ago
59,279 Posts
|
This read-only message was archived from a public mail list.
Mail From: ckelly (Chris Kelly)
If I remember, you'll need to drop the pan AND the valve body to remove the
shift shaft.
At 04:58 PM 8/31/2003 EDT, you wrote:
>hello all ,
>
> my c4 trans ('66 coupe , 289) has a bad leak coming from the shift lever
>shaft. i bought a new seal , removed the kickdown lever , neutral start
switch
>and shift linkage. i was hoping that the new seal would be accessible from
the
>outside of the trans case. it seems i may need to drop the pan to get to the
>inside of the shift shaft in order to remove it and get to the seal. is this
>what i have to do, or am i missing some secret to remove the shift lever?
>
>Jason
>'66 coupe
>_______________________________________________
>Classic-mustangs mailing list
>(email redacted)
>lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
>
>
========The Kelly's==============
Chris - (email redacted)
Debbie - (email redacted)
Merkel, Texas
=================================
Mail From: ckelly (Chris Kelly)
If I remember, you'll need to drop the pan AND the valve body to remove the
shift shaft.
At 04:58 PM 8/31/2003 EDT, you wrote:
>hello all ,
>
> my c4 trans ('66 coupe , 289) has a bad leak coming from the shift lever
>shaft. i bought a new seal , removed the kickdown lever , neutral start
switch
>and shift linkage. i was hoping that the new seal would be accessible from
the
>outside of the trans case. it seems i may need to drop the pan to get to the
>inside of the shift shaft in order to remove it and get to the seal. is this
>what i have to do, or am i missing some secret to remove the shift lever?
>
>Jason
>'66 coupe
>_______________________________________________
>Classic-mustangs mailing list
>(email redacted)
>lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
>
>
========The Kelly's==============
Chris - (email redacted)
Debbie - (email redacted)
Merkel, Texas
=================================
|
mailbot
Mail List Archive Bot
., Online, USA
|
Topic Creator (OP)
Sep 1, 2003 12:58 PM
Joined 15 years ago
59,279 Posts
|
This read-only message was archived from a public mail list.
Mail From: JCool289 ((email redacted))
In a message dated 9/1/03 12:05:21 AM, (email redacted) writes:
<< If I remember, you'll need to drop the pan AND the valve body to remove the
shift shaft. >>
that sucks......thanks for the bad news...haha
Mail From: JCool289 ((email redacted))
In a message dated 9/1/03 12:05:21 AM, (email redacted) writes:
<< If I remember, you'll need to drop the pan AND the valve body to remove the
shift shaft. >>
that sucks......thanks for the bad news...haha
|
mailbot
Mail List Archive Bot
., Online, USA
|
Topic Creator (OP)
Sep 1, 2003 01:36 PM
Joined 15 years ago
59,279 Posts
|
This read-only message was archived from a public mail list.
Mail From: ckelly (ckelly)
Sorry
Those seals seem to go out a lot. I'm losing one now. Tearing
into the trans is no fun at all.
On Mon, 1 Sep 2003 11:58:24 EDT, JCool289 wrote
> In a message dated 9/1/03 12:05:21 AM, (email redacted) writes:
>
> << If I remember, you'll need to drop the pan AND the valve body to
> remove the shift shaft. >>
>
> that sucks......thanks for the bad news...haha
> _______________________________________________
===================================
Chris Kelly
raceabilene.com
> Member <
Abilene Performance Car Association
Falcon Club of America
===================================
Mail From: ckelly (ckelly)
Sorry
Those seals seem to go out a lot. I'm losing one now. Tearing into the trans is no fun at all.
On Mon, 1 Sep 2003 11:58:24 EDT, JCool289 wrote
> In a message dated 9/1/03 12:05:21 AM, (email redacted) writes:
>
> << If I remember, you'll need to drop the pan AND the valve body to
> remove the shift shaft. >>
>
> that sucks......thanks for the bad news...haha
> _______________________________________________
===================================
Chris Kelly
raceabilene.com
> Member <
Abilene Performance Car Association
Falcon Club of America
===================================
|
mailbot
Mail List Archive Bot
., Online, USA
|
Topic Creator (OP)
Sep 1, 2003 06:01 PM
Joined 15 years ago
59,279 Posts
|
This read-only message was archived from a public mail list.
Mail From: psawyer (Dr. Paul R. Sawyer)
J--
This is why they all leak, mine included. Not a good design, but has
to REALLY leak to warrant the bother of a repair.
--Paul
On Sunday, August 31, 2003, at 03:58 PM, (email redacted) wrote:
> hello all ,
>
> my c4 trans ('66 coupe , 289) has a bad leak coming from the shift
> lever
> shaft. i bought a new seal , removed the kickdown lever , neutral
> start switch
> and shift linkage. i was hoping that the new seal would be accessible
> from the
> outside of the trans case. it seems i may need to drop the pan to get
> to the
> inside of the shift shaft in order to remove it and get to the seal.
> is this
> what i have to do, or am i missing some secret to remove the shift
> lever?
>
> Jason
> '66 coupe
> _______________________________________________
> Classic-mustangs mailing list
> (email redacted)
> lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
>
Mail From: psawyer (Dr. Paul R. Sawyer)
J--
This is why they all leak, mine included. Not a good design, but has
to REALLY leak to warrant the bother of a repair.
--Paul
On Sunday, August 31, 2003, at 03:58 PM, (email redacted) wrote:
> hello all ,
>
> my c4 trans ('66 coupe , 289) has a bad leak coming from the shift
> lever
> shaft. i bought a new seal , removed the kickdown lever , neutral
> start switch
> and shift linkage. i was hoping that the new seal would be accessible
> from the
> outside of the trans case. it seems i may need to drop the pan to get
> to the
> inside of the shift shaft in order to remove it and get to the seal.
> is this
> what i have to do, or am i missing some secret to remove the shift
> lever?
>
> Jason
> '66 coupe
> _______________________________________________
> Classic-mustangs mailing list
> (email redacted)
> lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
>
|
mailbot
Mail List Archive Bot
., Online, USA
|
Topic Creator (OP)
Sep 1, 2003 06:18 PM
Joined 15 years ago
59,279 Posts
|
This read-only message was archived from a public mail list.
Mail From: mjanderson3 (Mark Anderson)
Guys,
Once you have it repaired and the leak stopped, make it a practice to keep
your hand off the shifter. I used to rest my hand on the shift handle, and
kept causing leaks like this on another car I owned, and a mechanic told me
that the reason was the tension caused just by the weight of my hand/arm.
He said this can also mess up manual shifting transmissions, too.
Mark
WhitePony
68 coupe
----- Original Message -----
From: "Dr. Paul R. Sawyer" <(email redacted)>
To: "A list for owners of Classic Mustangs"
<(email redacted)>
Sent: Monday, September 01, 2003 2:01 PM
Subject: Re: [CM] c4 trans leak
> J--
>
> This is why they all leak, mine included. Not a good design, but has
> to REALLY leak to warrant the bother of a repair.
>
> --Paul
> On Sunday, August 31, 2003, at 03:58 PM, (email redacted) wrote:
>
> > hello all ,
> >
> > my c4 trans ('66 coupe , 289) has a bad leak coming from the shift
> > lever
> > shaft. i bought a new seal , removed the kickdown lever , neutral
> > start switch
> > and shift linkage. i was hoping that the new seal would be accessible
> > from the
> > outside of the trans case. it seems i may need to drop the pan to get
> > to the
> > inside of the shift shaft in order to remove it and get to the seal.
> > is this
> > what i have to do, or am i missing some secret to remove the shift
> > lever?
> >
> > Jason
> > '66 coupe
> > _______________________________________________
> > Classic-mustangs mailing list
> > (email redacted)
> > lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
> >
>
> _______________________________________________
> Classic-mustangs mailing list
> (email redacted)
> lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
>
Mail From: mjanderson3 (Mark Anderson)
Guys,
Once you have it repaired and the leak stopped, make it a practice to keep
your hand off the shifter. I used to rest my hand on the shift handle, and
kept causing leaks like this on another car I owned, and a mechanic told me
that the reason was the tension caused just by the weight of my hand/arm.
He said this can also mess up manual shifting transmissions, too.
Mark
WhitePony
68 coupe
----- Original Message -----
From: "Dr. Paul R. Sawyer" <(email redacted)>
To: "A list for owners of Classic Mustangs"
<(email redacted)>
Sent: Monday, September 01, 2003 2:01 PM
Subject: Re: [CM] c4 trans leak
> J--
>
> This is why they all leak, mine included. Not a good design, but has
> to REALLY leak to warrant the bother of a repair.
>
> --Paul
> On Sunday, August 31, 2003, at 03:58 PM, (email redacted) wrote:
>
> > hello all ,
> >
> > my c4 trans ('66 coupe , 289) has a bad leak coming from the shift
> > lever
> > shaft. i bought a new seal , removed the kickdown lever , neutral
> > start switch
> > and shift linkage. i was hoping that the new seal would be accessible
> > from the
> > outside of the trans case. it seems i may need to drop the pan to get
> > to the
> > inside of the shift shaft in order to remove it and get to the seal.
> > is this
> > what i have to do, or am i missing some secret to remove the shift
> > lever?
> >
> > Jason
> > '66 coupe
> > _______________________________________________
> > Classic-mustangs mailing list
> > (email redacted)
> > lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
> >
>
> _______________________________________________
> Classic-mustangs mailing list
> (email redacted)
> lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
>
|
mailbot
Mail List Archive Bot
., Online, USA
|
Topic Creator (OP)
Sep 2, 2003 12:41 PM
Joined 15 years ago
59,279 Posts
|
This read-only message was archived from a public mail list.
Mail From: SSEXSMITH (Sexsmith, Scott)
I've done this a couple of times. It's not as bad as it sounds. Just give
yourself some time and it's not a difficult process. The hardest part is
cleaning up the transmission fluid you spilled all over the garage floor.
Scott
-----Original Message-----
From: ckelly [mailto
email redacted)]
Sent: Monday, September 01, 2003 9:37 AM
To: A list for owners of Classic Mustangs
Subject: Re: [CM] c4 trans leak
Sorry
Those seals seem to go out a lot. I'm losing one now. Tearing
into the trans is no fun at all.
On Mon, 1 Sep 2003 11:58:24 EDT, JCool289 wrote
> In a message dated 9/1/03 12:05:21 AM, (email redacted) writes:
>
> << If I remember, you'll need to drop the pan AND the valve body to
> remove the shift shaft. >>
>
> that sucks......thanks for the bad news...haha
> _______________________________________________
===================================
Chris Kelly
raceabilene.com
> Member <
Abilene Performance Car Association
Falcon Club of America
===================================
_______________________________________________
Classic-mustangs mailing list (email redacted)
lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
Mail From: SSEXSMITH (Sexsmith, Scott)
I've done this a couple of times. It's not as bad as it sounds. Just give
yourself some time and it's not a difficult process. The hardest part is
cleaning up the transmission fluid you spilled all over the garage floor.
Scott
-----Original Message-----
From: ckelly [mailto
email redacted)] Sent: Monday, September 01, 2003 9:37 AM
To: A list for owners of Classic Mustangs
Subject: Re: [CM] c4 trans leak
Sorry
Those seals seem to go out a lot. I'm losing one now. Tearing into the trans is no fun at all.
On Mon, 1 Sep 2003 11:58:24 EDT, JCool289 wrote
> In a message dated 9/1/03 12:05:21 AM, (email redacted) writes:
>
> << If I remember, you'll need to drop the pan AND the valve body to
> remove the shift shaft. >>
>
> that sucks......thanks for the bad news...haha
> _______________________________________________
===================================
Chris Kelly
raceabilene.com
> Member <
Abilene Performance Car Association
Falcon Club of America
===================================
_______________________________________________
Classic-mustangs mailing list (email redacted)
lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
|
mailbot
Mail List Archive Bot
., Online, USA
|
Topic Creator (OP)
Sep 2, 2003 03:35 PM
Joined 15 years ago
59,279 Posts
|
This read-only message was archived from a public mail list.
Mail From: psawyer (Dr. Paul R. Sawyer)
Floor? How about your hair and face?
Man, what a messy job.
--P
On Tuesday, September 2, 2003, at 10:41 AM, Sexsmith, Scott wrote:
> I've done this a couple of times. It's not as bad as it sounds. Just
> give
> yourself some time and it's not a difficult process. The hardest part
> is
> cleaning up the transmission fluid you spilled all over the garage
> floor.
>
> Scott
>
> -----Original Message-----
> From: ckelly [mailto
email redacted)]
> Sent: Monday, September 01, 2003 9:37 AM
> To: A list for owners of Classic Mustangs
> Subject: Re: [CM] c4 trans leak
>
>
> Sorry
Those seals seem to go out a lot. I'm losing one now.
> Tearing
> into the trans is no fun at all.
>
> On Mon, 1 Sep 2003 11:58:24 EDT, JCool289 wrote
>> In a message dated 9/1/03 12:05:21 AM, (email redacted) writes:
>>
>> << If I remember, you'll need to drop the pan AND the valve body to
>> remove the shift shaft. >>
>>
>> that sucks......thanks for the bad news...haha
>> _______________________________________________
> ===================================
> Chris Kelly
> raceabilene.com
>> Member <
> Abilene Performance Car Association
> Falcon Club of America
> ===================================
>
> _______________________________________________
> Classic-mustangs mailing list (email redacted)
> lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
> _______________________________________________
> Classic-mustangs mailing list
> (email redacted)
> lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
>
Mail From: psawyer (Dr. Paul R. Sawyer)
Floor? How about your hair and face?
Man, what a messy job.
--P
On Tuesday, September 2, 2003, at 10:41 AM, Sexsmith, Scott wrote:
> I've done this a couple of times. It's not as bad as it sounds. Just
> give
> yourself some time and it's not a difficult process. The hardest part
> is
> cleaning up the transmission fluid you spilled all over the garage
> floor.
>
> Scott
>
> -----Original Message-----
> From: ckelly [mailto
email redacted)]> Sent: Monday, September 01, 2003 9:37 AM
> To: A list for owners of Classic Mustangs
> Subject: Re: [CM] c4 trans leak
>
>
> Sorry
Those seals seem to go out a lot. I'm losing one now. > Tearing
> into the trans is no fun at all.
>
> On Mon, 1 Sep 2003 11:58:24 EDT, JCool289 wrote
>> In a message dated 9/1/03 12:05:21 AM, (email redacted) writes:
>>
>> << If I remember, you'll need to drop the pan AND the valve body to
>> remove the shift shaft. >>
>>
>> that sucks......thanks for the bad news...haha
>> _______________________________________________
> ===================================
> Chris Kelly
> raceabilene.com
>> Member <
> Abilene Performance Car Association
> Falcon Club of America
> ===================================
>
> _______________________________________________
> Classic-mustangs mailing list (email redacted)
> lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
> _______________________________________________
> Classic-mustangs mailing list
> (email redacted)
> lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
>
|
mailbot
Mail List Archive Bot
., Online, USA
|
Topic Creator (OP)
Sep 2, 2003 03:43 PM
Joined 15 years ago
59,279 Posts
|
This read-only message was archived from a public mail list.
Mail From: SSEXSMITH (Sexsmith, Scott)
Good point Paul! The wearing of a plastic bag over one's head might help
the situation! <g>
Scott
-----Original Message-----
From: Dr. Paul R. Sawyer [mailto
email redacted)]
Sent: Tuesday, September 02, 2003 11:36 AM
To: A list for owners of Classic Mustangs
Subject: Re: [CM] c4 trans leak
Floor? How about your hair and face?
Man, what a messy job.
--P
On Tuesday, September 2, 2003, at 10:41 AM, Sexsmith, Scott wrote:
> I've done this a couple of times. It's not as bad as it sounds. Just
> give
> yourself some time and it's not a difficult process. The hardest part
> is
> cleaning up the transmission fluid you spilled all over the garage
> floor.
>
> Scott
>
> -----Original Message-----
> From: ckelly [mailto
email redacted)]
> Sent: Monday, September 01, 2003 9:37 AM
> To: A list for owners of Classic Mustangs
> Subject: Re: [CM] c4 trans leak
>
>
> Sorry
Those seals seem to go out a lot. I'm losing one now.
> Tearing
> into the trans is no fun at all.
>
> On Mon, 1 Sep 2003 11:58:24 EDT, JCool289 wrote
>> In a message dated 9/1/03 12:05:21 AM, (email redacted) writes:
>>
>> << If I remember, you'll need to drop the pan AND the valve body to
>> remove the shift shaft. >>
>>
>> that sucks......thanks for the bad news...haha
>> _______________________________________________
> ===================================
> Chris Kelly
> raceabilene.com
>> Member <
> Abilene Performance Car Association
> Falcon Club of America ===================================
>
> _______________________________________________
> Classic-mustangs mailing list (email redacted)
> lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
> _______________________________________________
> Classic-mustangs mailing list (email redacted)
> lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
>
_______________________________________________
Classic-mustangs mailing list (email redacted)
lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
Mail From: SSEXSMITH (Sexsmith, Scott)
Good point Paul! The wearing of a plastic bag over one's head might help
the situation! <g>
Scott
-----Original Message-----
From: Dr. Paul R. Sawyer [mailto
email redacted)] Sent: Tuesday, September 02, 2003 11:36 AM
To: A list for owners of Classic Mustangs
Subject: Re: [CM] c4 trans leak
Floor? How about your hair and face?
Man, what a messy job.
--P
On Tuesday, September 2, 2003, at 10:41 AM, Sexsmith, Scott wrote:
> I've done this a couple of times. It's not as bad as it sounds. Just
> give
> yourself some time and it's not a difficult process. The hardest part
> is
> cleaning up the transmission fluid you spilled all over the garage
> floor.
>
> Scott
>
> -----Original Message-----
> From: ckelly [mailto
email redacted)]> Sent: Monday, September 01, 2003 9:37 AM
> To: A list for owners of Classic Mustangs
> Subject: Re: [CM] c4 trans leak
>
>
> Sorry
Those seals seem to go out a lot. I'm losing one now.> Tearing
> into the trans is no fun at all.
>
> On Mon, 1 Sep 2003 11:58:24 EDT, JCool289 wrote
>> In a message dated 9/1/03 12:05:21 AM, (email redacted) writes:
>>
>> << If I remember, you'll need to drop the pan AND the valve body to
>> remove the shift shaft. >>
>>
>> that sucks......thanks for the bad news...haha
>> _______________________________________________
> ===================================
> Chris Kelly
> raceabilene.com
>> Member <
> Abilene Performance Car Association
> Falcon Club of America ===================================
>
> _______________________________________________
> Classic-mustangs mailing list (email redacted)
> lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
> _______________________________________________
> Classic-mustangs mailing list (email redacted)
> lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
>
_______________________________________________
Classic-mustangs mailing list (email redacted)
lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
|
c4 trans leak
#10
|
|
|
mailbot
Mail List Archive Bot
., Online, USA
|
Topic Creator (OP)
Sep 2, 2003 04:06 PM
Joined 15 years ago
59,279 Posts
|
This read-only message was archived from a public mail list.
Mail From: Siwik (Randy Siwik)
'The floor', That's where most of my hair is.
Well, there and the in the drain.
Randy-
"Dr. Paul R. Sawyer" wrote:
> Floor? How about your hair and face?
>
> Man, what a messy job. [snip].........
>
> The hardest part is
> > cleaning up the transmission fluid you spilled all over the garage
> > floor.
> >
> > Scott
> >
Mail From: Siwik (Randy Siwik)
'The floor', That's where most of my hair is.
Well, there and the in the drain.
Randy-
"Dr. Paul R. Sawyer" wrote:
> Floor? How about your hair and face?
>
> Man, what a messy job. [snip].........
>
> The hardest part is
> > cleaning up the transmission fluid you spilled all over the garage
> > floor.
> >
> > Scott
> >
Sorry, you can't reply to this topic. It has been closed.
Having trouble posting or changing forum settings?
Read the Forum Help (FAQ) or click Contact Support at the bottom of the page.



