Fordnatics List Archive

This read-only message was archived from a public mail list.
Mail From: (email redacted)

some of what dave.williams wrote:
>Next you mount the rack at the same height as the original inner
>tierod ends. Since the Mustang just has a cheesy tube underneath
>you'll need to fabricate a crossmember. 1x2 or 2x2, .063 wall tubing


Probably a basic question to everyone, but what kinds of places can I
go to for this sort of tubing? I've been looking for tubing for
chassis work (like the rack and pinion conversion) and smaller tubing
for things such as fuel rails.

Thanks!

Terrill (email redacted)

This read-only message was archived from a public mail list.
Mail From: (email redacted) (Dave Williams)


-> Probably a basic question to everyone, but what kinds of places can I
-> go to for this sort of tubing? I've been looking for tubing for

I've been very happy with a local place. They will sell microscopic
quantities of anything you want, and they'll ship UPS. They supply
every chassis builder around here, hobbyists, small machine shops, etc.

Pipe & Tube Supply
1621 North Cypress
North Little Rock, AR 72203
(501) 372-6556
(501) 372-7694 fax

Ask for Charles Mosely, and tell him you got the address off the net.