Classic Mustangs List Archive

This read-only message was archived from a public mail list.
Mail From: dano (Dan O'Reilly)

Just got my original '66 PS pump back from Precision Products, who rebuilt
it for me. I have to put a plug in for them - they did a fantastic job,
even to getting the dents in the can out and the paint right (I had one of
the less-common blue ones). They're not particularly speedy (it took a few
weeks) but on the other hand, it was well worth the wait.

---

Dan O'Reilly
1966 Mustang Pony Coupe
2002 Mustang Deluxe Convertible
Colorado Springs, CO

This read-only message was archived from a public mail list.
Mail From: benw (Ben Witso)

Hey Dan-

It's always nice to see referrals for companies that do good work. Do
you have contact info for Precision Products?

Ben
70 Mach 1
65 Convert
66 Convert

On Apr 7, 2005, at 9:16 PM, Dan O'Reilly wrote:

> Just got my original '66 PS pump back from Precision Products, who
> rebuilt
> it for me. I have to put a plug in for them - they did a fantastic
> job,
> even to getting the dents in the can out and the paint right (I had
> one of
> the less-common blue ones). They're not particularly speedy (it took
> a few
> weeks) but on the other hand, it was well worth the wait.
>
> ---
>
> Dan O'Reilly
> 1966 Mustang Pony Coupe
> 2002 Mustang Deluxe Convertible
> Colorado Springs, CO
>
>
>
> _______________________________________________
> Classic-mustangs mailing list
> (email redacted)
> lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
>

This read-only message was archived from a public mail list.
Mail From: dano (Dan O'Reilly)

Precison Products Inc
24165 IH 10 West
Suite 217-282
San Antonio, TX 78257-1159
210-687-1313

The guy who does this is named Randy.

They do all sorts of steering stuff, like steering boxes, PS pumps, PS
control valves, etc.. I think they're mostly Ford (specifically, Mustang).

At 08:23 PM 4/7/2005, Ben Witso wrote:
>Hey Dan-
>
>It's always nice to see referrals for companies that do good work. Do you
>have contact info for Precision Products?
>
>Ben
>70 Mach 1
>65 Convert
>66 Convert
>
>On Apr 7, 2005, at 9:16 PM, Dan O'Reilly wrote:
>
>>Just got my original '66 PS pump back from Precision Products, who rebuilt
>>it for me. I have to put a plug in for them - they did a fantastic job,
>>even to getting the dents in the can out and the paint right (I had one of
>>the less-common blue ones). They're not particularly speedy (it took a few
>>weeks) but on the other hand, it was well worth the wait.
>
>---
>
>Dan O'Reilly
>1966 Mustang Pony Coupe
>2002 Mustang Deluxe Convertible
>Colorado Springs, CO
>

This read-only message was archived from a public mail list.
Mail From: psawyer (Dr. Paul R. Sawyer)

D--

What did it cost? I have a slat neck AC pump for my 66 that needs to
be rebuilt.

Thanks!

--Paul

On Apr 7, 2005, at 9:32 PM, Dan O'Reilly wrote:

> Precison Products Inc
> 24165 IH 10 West
> Suite 217-282
> San Antonio, TX 78257-1159
> 210-687-1313
>
> The guy who does this is named Randy.
>
> They do all sorts of steering stuff, like steering boxes, PS pumps, PS
> control valves, etc.. I think they're mostly Ford (specifically,
> Mustang).
>
> At 08:23 PM 4/7/2005, Ben Witso wrote:
>> Hey Dan-
>>
>> It's always nice to see referrals for companies that do good work. Do
>> you have contact info for Precision Products?
>>
>> Ben
>> 70 Mach 1
>> 65 Convert
>> 66 Convert
>>
>> On Apr 7, 2005, at 9:16 PM, Dan O'Reilly wrote:
>>
>>> Just got my original '66 PS pump back from Precision Products, who
>>> rebuilt
>>> it for me. I have to put a plug in for them - they did a fantastic
>>> job,
>>> even to getting the dents in the can out and the paint right (I had
>>> one of
>>> the less-common blue ones). They're not particularly speedy (it
>>> took a few
>>> weeks) but on the other hand, it was well worth the wait.
>>
>> ---
>>
>> Dan O'Reilly
>> 1966 Mustang Pony Coupe
>> 2002 Mustang Deluxe Convertible
>> Colorado Springs, CO
>>
>
>
> _______________________________________________
> Classic-mustangs mailing list
> (email redacted)
> lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
>

This read-only message was archived from a public mail list.
Mail From: gavinbr (brian wenyon)

Hello,

Do they have a website?

Gavin

-----Original Message-----
From: (email redacted)
[mailtoemail redacted)]On Behalf Of Dan
O'Reilly
Sent: Thursday, April 07, 2005 7:32 PM
To: A list for owners of Classic Mustangs
Cc: A list for owners of Classic Mustangs
Subject: Re: [CM] PS Pump Rebuild

Precison Products Inc
24165 IH 10 West
Suite 217-282
San Antonio, TX 78257-1159
210-687-1313

The guy who does this is named Randy.

They do all sorts of steering stuff, like steering boxes, PS pumps, PS
control valves, etc.. I think they're mostly Ford (specifically, Mustang).

At 08:23 PM 4/7/2005, Ben Witso wrote:
>Hey Dan-
>
>It's always nice to see referrals for companies that do good work. Do you
>have contact info for Precision Products?
>
>Ben
>70 Mach 1
>65 Convert
>66 Convert
>
>On Apr 7, 2005, at 9:16 PM, Dan O'Reilly wrote:
>
>>Just got my original '66 PS pump back from Precision Products, who rebuilt
>>it for me. I have to put a plug in for them - they did a fantastic job,
>>even to getting the dents in the can out and the paint right (I had one of
>>the less-common blue ones). They're not particularly speedy (it took a
few
>>weeks) but on the other hand, it was well worth the wait.
>
>---
>
>Dan O'Reilly
>1966 Mustang Pony Coupe
>2002 Mustang Deluxe Convertible
>Colorado Springs, CO
>


_______________________________________________
Classic-mustangs mailing list
(email redacted)
lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs

This read-only message was archived from a public mail list.
Mail From: dano (Dan O'Reilly)

Mine was $99, including shipping back to me, a new pulley (mine was shot),
and the rebuild itself. I think the pulley was $20, so a rebuild sans
pulley would be about $75 or so.

At 05:29 PM 4/8/2005, Dr. Paul R. Sawyer wrote:
>D--
>
>What did it cost? I have a slat neck AC pump for my 66 that needs to be
>rebuilt.
>
>Thanks!
>
>--Paul
>
>On Apr 7, 2005, at 9:32 PM, Dan O'Reilly wrote:
>
>>Precison Products Inc
>>24165 IH 10 West
>>Suite 217-282
>>San Antonio, TX 78257-1159
>>210-687-1313
>>
>>The guy who does this is named Randy.
>>
>>They do all sorts of steering stuff, like steering boxes, PS pumps, PS
>>control valves, etc.. I think they're mostly Ford (specifically, Mustang).
>>
>>At 08:23 PM 4/7/2005, Ben Witso wrote:
>>>Hey Dan-
>>>
>>>It's always nice to see referrals for companies that do good work. Do
>>>you have contact info for Precision Products?
>>>
>>>Ben
>>>70 Mach 1
>>>65 Convert
>>>66 Convert
>>>
>>>On Apr 7, 2005, at 9:16 PM, Dan O'Reilly wrote:
>>>
>>>>Just got my original '66 PS pump back from Precision Products, who rebuilt
>>>>it for me. I have to put a plug in for them - they did a fantastic job,
>>>>even to getting the dents in the can out and the paint right (I had one of
>>>>the less-common blue ones). They're not particularly speedy (it took a few
>>>>weeks) but on the other hand, it was well worth the wait.
>>>
>>>---
>>>
>>>Dan O'Reilly
>>>1966 Mustang Pony Coupe
>>>2002 Mustang Deluxe Convertible
>>>Colorado Springs, CO
>>
>>
>>_______________________________________________
>>Classic-mustangs mailing list
>>(email redacted)
>>lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
>
>_______________________________________________
>Classic-mustangs mailing list
>(email redacted)
>lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs

---

Dan O'Reilly
1966 Mustang Pony Coupe
2002 Mustang Deluxe Convertible
Colorado Springs, CO

This read-only message was archived from a public mail list.
Mail From: dkidds ((email redacted))

I would recommend Roger Rode at Rode's Restoration in Ohio.
WWW.RODESRESTORATION.COM

I mailed my steering box to Roger on Wednesday and it was back on my
door step the following Tuesday. Roger is 2 states away from me, so I
was impressed. He did a fantastic job and he is reasonably priced! I
have bought other p/s parts from Roger. He is a machinest and has the
specs for some of the original brackets, etc.

I decided to go with Roger after seeing a couple of horror stories about
others having mailed their parts to Texas and not having any idea when
and if they were going to get them back.

It's best to give Roger a call. He can't keep up with e-mail with his
work load.

David



Quoting "Dr. Paul R. Sawyer" <(email redacted)>:

> D--
>
> What did it cost? I have a slat neck AC pump for my 66 that needs to
> be rebuilt.
>
> Thanks!
>
> --Paul
>
> On Apr 7, 2005, at 9:32 PM, Dan O'Reilly wrote:
>
> > Precison Products Inc
> > 24165 IH 10 West
> > Suite 217-282
> > San Antonio, TX 78257-1159
> > 210-687-1313
> >
> > The guy who does this is named Randy.
> >
> > They do all sorts of steering stuff, like steering boxes, PS pumps,
> PS
> > control valves, etc.. I think they're mostly Ford (specifically,
> > Mustang).
> >
> > At 08:23 PM 4/7/2005, Ben Witso wrote:
> >> Hey Dan-
> >>
> >> It's always nice to see referrals for companies that do good work.
> Do
> >> you have contact info for Precision Products?
> >>
> >> Ben
> >> 70 Mach 1
> >> 65 Convert
> >> 66 Convert
> >>
> >> On Apr 7, 2005, at 9:16 PM, Dan O'Reilly wrote:
> >>
> >>> Just got my original '66 PS pump back from Precision Products,
> who
> >>> rebuilt
> >>> it for me. I have to put a plug in for them - they did a
> fantastic
> >>> job,
> >>> even to getting the dents in the can out and the paint right (I
> had
> >>> one of
> >>> the less-common blue ones). They're not particularly speedy (it
> >>> took a few
> >>> weeks) but on the other hand, it was well worth the wait.
> >>
> >> ---
> >>
> >> Dan O'Reilly
> >> 1966 Mustang Pony Coupe
> >> 2002 Mustang Deluxe Convertible
> >> Colorado Springs, CO
> >>
> >
> >
> > _______________________________________________
> > Classic-mustangs mailing list
> > (email redacted)
> > lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
> >
>
> _______________________________________________
> Classic-mustangs mailing list
> (email redacted)
> lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
>