Classic Mustangs List Archive

This read-only message was archived from a public mail list.
Mail From: wal (Wal Marshall)


Some good info on oils here.. Focused on making sure your new cam and
lifters survive a rebuild ....

editions.amospublishing.com/MNGE/Default.aspx?d=20090701&pagenum=80

Wal Marshall

This read-only message was archived from a public mail list.
Mail From: ckelly (Chris Kelly)

All I get is an advert for a Mustang magazine. No links or anything else.

=====================================
Chris Kelly - ckelly at raceabilene.com
raceabilene.net/kelly/hotrod
Merkel, Texas
Member:
International Hot Rod Association
Abilene Performance Car Association
Falcon Club of America
=====================================
> -----Original Message-----
> From: classic-mustangs-bounces at lists.twistedpair.ca
[mailto:classic-mustangs-
> bounces at lists.twistedpair.ca] On Behalf Of Wal Marshall
> Sent: Friday, May 08, 2009 6:01 PM
> To: Chris Kelly
> Subject: [CM] Oil info on breaking in camms
>
>
> Some good info on oils here.. Focused on making sure your new cam and
> lifters survive a rebuild ....
>
> editions.amospublishing.com/MNGE/Default.aspx?d=20090701&pagenum=80
>
> Wal Marshall
>
> _______________________________________________
> Classic-mustangs mailing list
> Classic-mustangs at lists.twistedpair.ca
> lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
>
> Visit the Classic Mustang Wiki! sauce.donair.org/~cm/

This read-only message was archived from a public mail list.
Mail From: wal (Wal Marshall)

Chris,

Its looks like the page # was lost off the link when it wrapped. .(see
below) . Go to page 80 in the mag to read the article.

Cheers, Wal

-----Original Message-----
From: classic-mustangs-bounces at lists.twistedpair.ca
[mailto:classic-mustangs-bounces at lists.twistedpair.ca] On Behalf Of Chris
Kelly
Sent: Sunday, 10 May 2009 3:01 a.m.
To: Wal Marshall
Subject: Re: [CM] Oil info on breaking in camms

All I get is an advert for a Mustang magazine. No links or anything else.

=====================================
Chris Kelly - ckelly at raceabilene.com
raceabilene.net/kelly/hotrod
Merkel, Texas
Member:
International Hot Rod Association
Abilene Performance Car Association
Falcon Club of America
=====================================
> -----Original Message-----
> From: classic-mustangs-bounces at lists.twistedpair.ca
[mailto:classic-mustangs-
> bounces at lists.twistedpair.ca] On Behalf Of Wal Marshall
> Sent: Friday, May 08, 2009 6:01 PM
> To: Chris Kelly
> Subject: [CM] Oil info on breaking in camms
>
>
> Some good info on oils here.. Focused on making sure your new cam and
> lifters survive a rebuild ....
>
> editions.amospublishing.com/MNGE/Default.aspx?d=20090701&pagenu
> m=80
>
> Wal Marshall
>
> _______________________________________________
> Classic-mustangs mailing list
> Classic-mustangs at lists.twistedpair.ca
> lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
>
> Visit the Classic Mustang Wiki! sauce.donair.org/~cm/

_______________________________________________
Classic-mustangs mailing list
Classic-mustangs at lists.twistedpair.ca
lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs

Visit the Classic Mustang Wiki! sauce.donair.org/~cm/ No virus found
in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.287 / Virus Database: 270.12.22/2105 - Release Date: 05/08/09
11:43:00

This read-only message was archived from a public mail list.
Mail From: ckelly (Chris Kelly)

Well, duh - I sound have seen that. After registering for the digital
edition, it's actually on page 84. Weird.

Good article, think they covered that very well. I use VR-1 in everything
here, so far so good. And on my flat tappet solid lift cams, I use Isky's
EDM lifters with some EOS for break-in and leave the springs as installed.
No problems yet. The current 351C has 130 seat, 380 open spring pressure -
doubles with a damper.

=====================================
Chris Kelly - ckelly at raceabilene.com
raceabilene.net/kelly/hotrod
Merkel, Texas
Member:
International Hot Rod Association
Abilene Performance Car Association
Falcon Club of America
=====================================
> -----Original Message-----
> From: classic-mustangs-bounces at lists.twistedpair.ca
[mailto:classic-mustangs-
> bounces at lists.twistedpair.ca] On Behalf Of Wal Marshall
> Sent: Saturday, May 09, 2009 5:03 PM
> To: Chris Kelly
> Subject: Re: [CM] Oil info on breaking in camms
>
> Chris,
>
> Its looks like the page # was lost off the link when it wrapped. .(see
> below) . Go to page 80 in the mag to read the article.
>
> Cheers, Wal
>
> -----Original Message-----
> From: classic-mustangs-bounces at lists.twistedpair.ca
> [mailto:classic-mustangs-bounces at lists.twistedpair.ca] On Behalf Of Chris
> Kelly
> Sent: Sunday, 10 May 2009 3:01 a.m.
> To: Wal Marshall
> Subject: Re: [CM] Oil info on breaking in camms
>
> All I get is an advert for a Mustang magazine. No links or anything else.
>
> =====================================
> Chris Kelly - ckelly at raceabilene.com
> raceabilene.net/kelly/hotrod
> Merkel, Texas
> Member:
> International Hot Rod Association
> Abilene Performance Car Association
> Falcon Club of America
> =====================================
> > -----Original Message-----
> > From: classic-mustangs-bounces at lists.twistedpair.ca
> [mailto:classic-mustangs-
> > bounces at lists.twistedpair.ca] On Behalf Of Wal Marshall
> > Sent: Friday, May 08, 2009 6:01 PM
> > To: Chris Kelly
> > Subject: [CM] Oil info on breaking in camms
> >
> >
> > Some good info on oils here.. Focused on making sure your new cam and
> > lifters survive a rebuild ....
> >
> > editions.amospublishing.com/MNGE/Default.aspx?d=20090701&pagenu
> > m=80
> >
> > Wal Marshall
> >
> > _______________________________________________
> > Classic-mustangs mailing list
> > Classic-mustangs at lists.twistedpair.ca
> > lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
> >
> > Visit the Classic Mustang Wiki! sauce.donair.org/~cm/
>
> _______________________________________________
> Classic-mustangs mailing list
> Classic-mustangs at lists.twistedpair.ca
> lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
>
> Visit the Classic Mustang Wiki! sauce.donair.org/~cm/ No virus
found
> in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.287 / Virus Database: 270.12.22/2105 - Release Date: 05/08/09
> 11:43:00
>
> _______________________________________________
> Classic-mustangs mailing list
> Classic-mustangs at lists.twistedpair.ca
> lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
>
> Visit the Classic Mustang Wiki! sauce.donair.org/~cm/