Classic Mustangs List Archive

This read-only message was archived from a public mail list.
Mail From: dano (Dan O'Reilly)

Want to add the 3 center gauges to my '71 Mach. Other than apparently
needing a different engine gauge feed in the engine compartment, what's
different (if anything) under the dash?

---

Dan O'Reilly
1966 Nightmist Blue Pony Coupe
1971 Red Mach 1
2002 Black Deluxe Convertible
Colorado Springs, CO

This read-only message was archived from a public mail list.
Mail From: jmanley (Jay Manley)

There is a different wiring harness that you need to install.
Jay
----- Original Message -----
From: "Dan O'Reilly" <dano at process.com>
To: <JMANLEY at cableone.net>
Sent: Sunday, September 03, 2006 11:16 PM
Subject: [CM] Gauges on '71 Mach


> Want to add the 3 center gauges to my '71 Mach. Other than apparently
> needing a different engine gauge feed in the engine compartment, what's
> different (if anything) under the dash?
>
> ---
>
> Dan O'Reilly
> 1966 Nightmist Blue Pony Coupe
> 1971 Red Mach 1
> 2002 Black Deluxe Convertible
> Colorado Springs, CO
>
>
>
> _______________________________________________
> Classic-mustangs mailing list
> Classic-mustangs at lists.twistedpair.ca
> lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
>
> Visit the Classic Mustang Wiki! sauce.donair.org/~cm/

This read-only message was archived from a public mail list.
Mail From: dano (Dan O'Reilly)

Which one? I know the engine feed is different, but from what I can tell
the under-dash harness is the same.

At 08:45 PM 9/4/2006, Jay Manley wrote:
>There is a different wiring harness that you need to install.
>Jay
>----- Original Message -----
>From: "Dan O'Reilly" <dano at process.com>
>To: <JMANLEY at cableone.net>
>Sent: Sunday, September 03, 2006 11:16 PM
>Subject: [CM] Gauges on '71 Mach
>
>
> > Want to add the 3 center gauges to my '71 Mach. Other than apparently
> > needing a different engine gauge feed in the engine compartment, what's
> > different (if anything) under the dash?
> >

---

Dan O'Reilly
1966 Nightmist Blue Pony Coupe
1971 Red Mach 1
2002 Black Deluxe Convertible
Colorado Springs, CO

This read-only message was archived from a public mail list.
Mail From: jmanley (Jay Manley)

On my buddy's that didn't have it, we had to add the harness that comes with
the gauges as it didn't have it. Not sure why you'd have it under the dash
and he wouldn't have, unless your car originally came with gauges.

----- Original Message -----
From: "Dan O'Reilly" <dano at process.com>
To: <JMANLEY at cableone.net>
Sent: Monday, September 04, 2006 10:21 PM
Subject: Re: [CM] Gauges on '71 Mach


> Which one? I know the engine feed is different, but from what I can tell
> the under-dash harness is the same.
>
> At 08:45 PM 9/4/2006, Jay Manley wrote:
>>There is a different wiring harness that you need to install.
>>Jay
>>----- Original Message -----
>>From: "Dan O'Reilly" <dano at process.com>
>>To: <JMANLEY at cableone.net>
>>Sent: Sunday, September 03, 2006 11:16 PM
>>Subject: [CM] Gauges on '71 Mach
>>
>>
>> > Want to add the 3 center gauges to my '71 Mach. Other than apparently
>> > needing a different engine gauge feed in the engine compartment, what's
>> > different (if anything) under the dash?
>> >
>
> ---
>
> Dan O'Reilly
> 1966 Nightmist Blue Pony Coupe
> 1971 Red Mach 1
> 2002 Black Deluxe Convertible
> Colorado Springs, CO
>
>
>
> _______________________________________________
> Classic-mustangs mailing list
> Classic-mustangs at lists.twistedpair.ca
> lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
>
> Visit the Classic Mustang Wiki! sauce.donair.org/~cm/

This read-only message was archived from a public mail list.
Mail From: dano (Dan O'Reilly)

Which harness? The one that physically attaches to the individual gauges
on the back of the gauge cluster, then terminates in a 4-pin connector,
looks to be about 12" or so long?

At 09:06 AM 9/5/2006, Jay Manley wrote:
>On my buddy's that didn't have it, we had to add the harness that comes with
>the gauges as it didn't have it. Not sure why you'd have it under the dash
>and he wouldn't have, unless your car originally came with gauges.
>
>----- Original Message -----
>From: "Dan O'Reilly" <dano at process.com>
>To: <JMANLEY at cableone.net>
>Sent: Monday, September 04, 2006 10:21 PM
>Subject: Re: [CM] Gauges on '71 Mach
>
>
> > Which one? I know the engine feed is different, but from what I can tell
> > the under-dash harness is the same.
> >
> > At 08:45 PM 9/4/2006, Jay Manley wrote:
> >>There is a different wiring harness that you need to install.
> >>Jay
> >>----- Original Message -----
> >>From: "Dan O'Reilly" <dano at process.com>
> >>To: <JMANLEY at cableone.net>
> >>Sent: Sunday, September 03, 2006 11:16 PM
> >>Subject: [CM] Gauges on '71 Mach
> >>
> >>
> >> > Want to add the 3 center gauges to my '71 Mach. Other than apparently
> >> > needing a different engine gauge feed in the engine compartment, what's
> >> > different (if anything) under the dash?
> >> >
> >
> > ---
> >
> > Dan O'Reilly
> > 1966 Nightmist Blue Pony Coupe
> > 1971 Red Mach 1
> > 2002 Black Deluxe Convertible
> > Colorado Springs, CO
> >
> >
> >
> > _______________________________________________
> > Classic-mustangs mailing list
> > Classic-mustangs at lists.twistedpair.ca
> > lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
> >
> > Visit the Classic Mustang Wiki! sauce.donair.org/~cm/
>
>_______________________________________________
>Classic-mustangs mailing list
>Classic-mustangs at lists.twistedpair.ca
>lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
>
>Visit the Classic Mustang Wiki! sauce.donair.org/~cm/

------
+-------------------------------+----------------------------------------+
| Dan O'Reilly | "There are 10 types of people in this |
| Principal Engineer | world: those who understand binary |
| Process Software | and those who don't." |
| process.com | |
+-------------------------------+----------------------------------------+