Classic Mustangs List Archive
67 coupe project FOR SALE
Posted by mailbot
|
mailbot
Mail List Archive Bot
., Online, USA
|
Topic Creator (OP)
Feb 26, 2002 01:36 PM
Joined 15 years ago
59,279 Posts
|
This read-only message was archived from a public mail list.
Mail From: (email redacted) (Desmarets, Guillaume)
OK, let's try again (first post bounced)
So I am giving up on my 67 coupe project, here is the add for it. I am
listing the price for the major parts I bought, however there are lots more.
Please do not contact me if you just want some of the parts, thanks.
67 Mustang Coupe PROJECT, to be finished. All parts included, to build a
very nice restomod.
NO PARTS SOLD SEPARATELY. ALL OR NOTHING.
Located in Santa Clara, CA. Contact (email redacted). Serious enquiries only
please. $6000.
Engine: All NEW parts:
Blueprinted engine
5.0 block ($300)
5.0 crankshaft ($200)
5.0 roller cam (Lunatti)
5.0 Flywheel
5.0 damper
Trickflow aluminium heads ($850)
Trickflow pushrods ($54)
Hydraulic roller lifters ($100)
Ford Motorsport Roller rockers (>$200)
Weiand Stealth intake ($158)
Edelbrock carb. ($200) + fuel gauge ($34)
JBA shorty headers ($360)
Crane Cam Fireball ignition ($160)
Crane Cam performance coil ($50)
Ford Motorsport plug wires ($50)
New timing chain cover ($130)
Holley Fuel Pump ($65)
All ARP bolts (>$100)
Mr Gasket thermostat
Windage tray ($57)
Used/rebuilt:
rebuilt 5.0 distributor
rebuilt alternator
used oil pan (w/ magnetic drain plug)
"Mustang powered by Ford" aluminium valve cover ($100)
Transmission:
Centerforce clutch ($350)
5.0 bellhousing
ready for T5 swap
T5 transmission mount ($35)
T5 transmission yoke ($65)
Rebuild 8" rear axle w/ Richmond 2.8 (>$400)
Suspension/steering
Total control Rack and Pinion Power steering kit (>$1500)
Lowered A arm, reinforced shock towers
KYB struts ($130)
Mustangs Plus 620 Front Coil Springs ($69)
Export brace ($50)
Mustang Plus 4½-Leaf Mid Eye Leaf Springs ($189)
Mustangs Plus Racing Leaf Springs Shackles ($80)
Front 1 1/8" sway bar ($90)
Rear 3/4" sway bar ($80)
Energy Suspension Polyurethane GREASABLE sway bar bushing (>$25)
Fuel
New fuel tank w/ drain ($120)
New fuel tank sender ($25)
New SS fuel line ($83)
Engine bay:
New 3+ row radiator ($230)
New HiPo air filter ($36)
Optima battery ($140)
Moroso trunk battery relocating kit (>$200)
Rebuilt PS pump
Brakes:
All new stainless steel lines ($64+45+28)
All new brake hoses ($40+$20)
New front discs ($200)
New front calipers ($250)
Rebuilt power booster
New front distribution block ($80)
New front disc brake pressure control valve ($180)
Turned rear drums
Rebuilt rear wheel cylinders
Drum break rebuild kit ($10)
Interior:
original seat + 70 front seats (w/ integrated headrests), w/TMI hupolstery
1968 shoulder seat belts
firewall insulation ($45)
undercarpet insulation ($25)
original AC parts
Misc:
new parts: all sorts of gaskets (windshields, doors, door windows, AC
rebuilt kit,
trunk, etc...) , light lenses, ignition switch, windows handles, headliner +
glue ($25),
package tray, dash lenses, books (assembly manuals), etc...
Dynomax SuperTurbo mufflers ($60)
Dynomax stainless steel exhaust clamps ($32)
Correct black interior paint
Body:
stripped down, needs surface rust removal (been a while since paint was
removed)
underbody clean rust removed, primed, painted, coated with sound deadener in
places
engine bay cleaned, primed, painted
Mail From: (email redacted) (Desmarets, Guillaume)
OK, let's try again (first post bounced)
So I am giving up on my 67 coupe project, here is the add for it. I am
listing the price for the major parts I bought, however there are lots more.
Please do not contact me if you just want some of the parts, thanks.
67 Mustang Coupe PROJECT, to be finished. All parts included, to build a
very nice restomod.
NO PARTS SOLD SEPARATELY. ALL OR NOTHING.
Located in Santa Clara, CA. Contact (email redacted). Serious enquiries only
please. $6000.
Engine: All NEW parts:
Blueprinted engine
5.0 block ($300)
5.0 crankshaft ($200)
5.0 roller cam (Lunatti)
5.0 Flywheel
5.0 damper
Trickflow aluminium heads ($850)
Trickflow pushrods ($54)
Hydraulic roller lifters ($100)
Ford Motorsport Roller rockers (>$200)
Weiand Stealth intake ($158)
Edelbrock carb. ($200) + fuel gauge ($34)
JBA shorty headers ($360)
Crane Cam Fireball ignition ($160)
Crane Cam performance coil ($50)
Ford Motorsport plug wires ($50)
New timing chain cover ($130)
Holley Fuel Pump ($65)
All ARP bolts (>$100)
Mr Gasket thermostat
Windage tray ($57)
Used/rebuilt:
rebuilt 5.0 distributor
rebuilt alternator
used oil pan (w/ magnetic drain plug)
"Mustang powered by Ford" aluminium valve cover ($100)
Transmission:
Centerforce clutch ($350)
5.0 bellhousing
ready for T5 swap
T5 transmission mount ($35)
T5 transmission yoke ($65)
Rebuild 8" rear axle w/ Richmond 2.8 (>$400)
Suspension/steering
Total control Rack and Pinion Power steering kit (>$1500)
Lowered A arm, reinforced shock towers
KYB struts ($130)
Mustangs Plus 620 Front Coil Springs ($69)
Export brace ($50)
Mustang Plus 4½-Leaf Mid Eye Leaf Springs ($189)
Mustangs Plus Racing Leaf Springs Shackles ($80)
Front 1 1/8" sway bar ($90)
Rear 3/4" sway bar ($80)
Energy Suspension Polyurethane GREASABLE sway bar bushing (>$25)
Fuel
New fuel tank w/ drain ($120)
New fuel tank sender ($25)
New SS fuel line ($83)
Engine bay:
New 3+ row radiator ($230)
New HiPo air filter ($36)
Optima battery ($140)
Moroso trunk battery relocating kit (>$200)
Rebuilt PS pump
Brakes:
All new stainless steel lines ($64+45+28)
All new brake hoses ($40+$20)
New front discs ($200)
New front calipers ($250)
Rebuilt power booster
New front distribution block ($80)
New front disc brake pressure control valve ($180)
Turned rear drums
Rebuilt rear wheel cylinders
Drum break rebuild kit ($10)
Interior:
original seat + 70 front seats (w/ integrated headrests), w/TMI hupolstery
1968 shoulder seat belts
firewall insulation ($45)
undercarpet insulation ($25)
original AC parts
Misc:
new parts: all sorts of gaskets (windshields, doors, door windows, AC
rebuilt kit,
trunk, etc...) , light lenses, ignition switch, windows handles, headliner +
glue ($25),
package tray, dash lenses, books (assembly manuals), etc...
Dynomax SuperTurbo mufflers ($60)
Dynomax stainless steel exhaust clamps ($32)
Correct black interior paint
Body:
stripped down, needs surface rust removal (been a while since paint was
removed)
underbody clean rust removed, primed, painted, coated with sound deadener in
places
engine bay cleaned, primed, painted
|
mailbot
Mail List Archive Bot
., Online, USA
|
Topic Creator (OP)
Feb 26, 2002 10:15 PM
Joined 15 years ago
59,279 Posts
|
This read-only message was archived from a public mail list.
Mail From: (email redacted) (Kevin Dudak)
Do you have any pictures?
-----Original Message-----
From: (email redacted)
[mailto
email redacted)]On Behalf Of
Desmarets, Guillaume
Sent: Tuesday, February 26, 2002 10:36 AM
To: '(email redacted)'
Subject: [CM] 67 coupe project FOR SALE
OK, let's try again (first post bounced)
So I am giving up on my 67 coupe project, here is the add for it. I am
listing the price for the major parts I bought, however there are lots more.
Please do not contact me if you just want some of the parts, thanks.
67 Mustang Coupe PROJECT, to be finished. All parts included, to build a
very nice restomod.
NO PARTS SOLD SEPARATELY. ALL OR NOTHING.
Located in Santa Clara, CA. Contact (email redacted). Serious enquiries only
please. $6000.
Engine: All NEW parts:
Blueprinted engine
5.0 block ($300)
5.0 crankshaft ($200)
5.0 roller cam (Lunatti)
5.0 Flywheel
5.0 damper
Trickflow aluminium heads ($850)
Trickflow pushrods ($54)
Hydraulic roller lifters ($100)
Ford Motorsport Roller rockers (>$200)
Weiand Stealth intake ($158)
Edelbrock carb. ($200) + fuel gauge ($34)
JBA shorty headers ($360)
Crane Cam Fireball ignition ($160)
Crane Cam performance coil ($50)
Ford Motorsport plug wires ($50)
New timing chain cover ($130)
Holley Fuel Pump ($65)
All ARP bolts (>$100)
Mr Gasket thermostat
Windage tray ($57)
Used/rebuilt:
rebuilt 5.0 distributor
rebuilt alternator
used oil pan (w/ magnetic drain plug)
"Mustang powered by Ford" aluminium valve cover ($100)
Transmission:
Centerforce clutch ($350)
5.0 bellhousing
ready for T5 swap
T5 transmission mount ($35)
T5 transmission yoke ($65)
Rebuild 8" rear axle w/ Richmond 2.8 (>$400)
Suspension/steering
Total control Rack and Pinion Power steering kit (>$1500)
Lowered A arm, reinforced shock towers
KYB struts ($130)
Mustangs Plus 620 Front Coil Springs ($69)
Export brace ($50)
Mustang Plus 4½-Leaf Mid Eye Leaf Springs ($189)
Mustangs Plus Racing Leaf Springs Shackles ($80)
Front 1 1/8" sway bar ($90)
Rear 3/4" sway bar ($80)
Energy Suspension Polyurethane GREASABLE sway bar bushing (>$25)
Fuel
New fuel tank w/ drain ($120)
New fuel tank sender ($25)
New SS fuel line ($83)
Engine bay:
New 3+ row radiator ($230)
New HiPo air filter ($36)
Optima battery ($140)
Moroso trunk battery relocating kit (>$200)
Rebuilt PS pump
Brakes:
All new stainless steel lines ($64+45+28)
All new brake hoses ($40+$20)
New front discs ($200)
New front calipers ($250)
Rebuilt power booster
New front distribution block ($80)
New front disc brake pressure control valve ($180)
Turned rear drums
Rebuilt rear wheel cylinders
Drum break rebuild kit ($10)
Interior:
original seat + 70 front seats (w/ integrated headrests), w/TMI hupolstery
1968 shoulder seat belts
firewall insulation ($45)
undercarpet insulation ($25)
original AC parts
Misc:
new parts: all sorts of gaskets (windshields, doors, door windows, AC
rebuilt kit,
trunk, etc...) , light lenses, ignition switch, windows handles, headliner +
glue ($25),
package tray, dash lenses, books (assembly manuals), etc...
Dynomax SuperTurbo mufflers ($60)
Dynomax stainless steel exhaust clamps ($32)
Correct black interior paint
Body:
stripped down, needs surface rust removal (been a while since paint was
removed)
underbody clean rust removed, primed, painted, coated with sound deadener in
places
engine bay cleaned, primed, painted
_______________________________________________
Classic-mustangs mailing list
(email redacted)
mix.twistedpair.ca/mailman/listinfo/classic-mustangs
Mail From: (email redacted) (Kevin Dudak)
Do you have any pictures?
-----Original Message-----
From: (email redacted)
[mailto
email redacted)]On Behalf OfDesmarets, Guillaume
Sent: Tuesday, February 26, 2002 10:36 AM
To: '(email redacted)'
Subject: [CM] 67 coupe project FOR SALE
OK, let's try again (first post bounced)
So I am giving up on my 67 coupe project, here is the add for it. I am
listing the price for the major parts I bought, however there are lots more.
Please do not contact me if you just want some of the parts, thanks.
67 Mustang Coupe PROJECT, to be finished. All parts included, to build a
very nice restomod.
NO PARTS SOLD SEPARATELY. ALL OR NOTHING.
Located in Santa Clara, CA. Contact (email redacted). Serious enquiries only
please. $6000.
Engine: All NEW parts:
Blueprinted engine
5.0 block ($300)
5.0 crankshaft ($200)
5.0 roller cam (Lunatti)
5.0 Flywheel
5.0 damper
Trickflow aluminium heads ($850)
Trickflow pushrods ($54)
Hydraulic roller lifters ($100)
Ford Motorsport Roller rockers (>$200)
Weiand Stealth intake ($158)
Edelbrock carb. ($200) + fuel gauge ($34)
JBA shorty headers ($360)
Crane Cam Fireball ignition ($160)
Crane Cam performance coil ($50)
Ford Motorsport plug wires ($50)
New timing chain cover ($130)
Holley Fuel Pump ($65)
All ARP bolts (>$100)
Mr Gasket thermostat
Windage tray ($57)
Used/rebuilt:
rebuilt 5.0 distributor
rebuilt alternator
used oil pan (w/ magnetic drain plug)
"Mustang powered by Ford" aluminium valve cover ($100)
Transmission:
Centerforce clutch ($350)
5.0 bellhousing
ready for T5 swap
T5 transmission mount ($35)
T5 transmission yoke ($65)
Rebuild 8" rear axle w/ Richmond 2.8 (>$400)
Suspension/steering
Total control Rack and Pinion Power steering kit (>$1500)
Lowered A arm, reinforced shock towers
KYB struts ($130)
Mustangs Plus 620 Front Coil Springs ($69)
Export brace ($50)
Mustang Plus 4½-Leaf Mid Eye Leaf Springs ($189)
Mustangs Plus Racing Leaf Springs Shackles ($80)
Front 1 1/8" sway bar ($90)
Rear 3/4" sway bar ($80)
Energy Suspension Polyurethane GREASABLE sway bar bushing (>$25)
Fuel
New fuel tank w/ drain ($120)
New fuel tank sender ($25)
New SS fuel line ($83)
Engine bay:
New 3+ row radiator ($230)
New HiPo air filter ($36)
Optima battery ($140)
Moroso trunk battery relocating kit (>$200)
Rebuilt PS pump
Brakes:
All new stainless steel lines ($64+45+28)
All new brake hoses ($40+$20)
New front discs ($200)
New front calipers ($250)
Rebuilt power booster
New front distribution block ($80)
New front disc brake pressure control valve ($180)
Turned rear drums
Rebuilt rear wheel cylinders
Drum break rebuild kit ($10)
Interior:
original seat + 70 front seats (w/ integrated headrests), w/TMI hupolstery
1968 shoulder seat belts
firewall insulation ($45)
undercarpet insulation ($25)
original AC parts
Misc:
new parts: all sorts of gaskets (windshields, doors, door windows, AC
rebuilt kit,
trunk, etc...) , light lenses, ignition switch, windows handles, headliner +
glue ($25),
package tray, dash lenses, books (assembly manuals), etc...
Dynomax SuperTurbo mufflers ($60)
Dynomax stainless steel exhaust clamps ($32)
Correct black interior paint
Body:
stripped down, needs surface rust removal (been a while since paint was
removed)
underbody clean rust removed, primed, painted, coated with sound deadener in
places
engine bay cleaned, primed, painted
_______________________________________________
Classic-mustangs mailing list
(email redacted)
mix.twistedpair.ca/mailman/listinfo/classic-mustangs
Sorry, you can't reply to this topic. It has been closed.
Having trouble posting or changing forum settings?
Read the Forum Help (FAQ) or click Contact Support at the bottom of the page.



