Classic Mustangs List Archive

This read-only message was archived from a public mail list.
Mail From: Mark Dixon (email redacted)

Greetings,

I need some P/S gurus here to provide some answers please. I have a 65 6
cylinder with P/S and the steering link is bent badly. As I intend doing a
V8 conversion soon anyway, I have acquired a V8 link and the inner/outer
left side tie-rods from a 64 1/2. There are immediately obvious differences
in the cylinder connection to the link but can I fit the V8 stuff without
buying any other bits. I fear I may need a new idler arm and right side
tie-rods because of size differences in the link, but can anyone shed some
lite on this ?

Thanks

Mark