'65 Mustang Hardtop Body Measurements : Classic Mustangs List Archive : Ford First

'65 Mustang Hardtop Body Measurements #1
mailbot Mail List Archive Bot ., Online, USA	Topic Creator (OP) Aug 2, 2001 04:07 PM Joined 15 years ago 59,279 Posts

This read-only message was archived from a public mail list.
Mail From: (email redacted) ((email redacted))

--part1_30.188e11d7.289afebd_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit

I will be replacing the trunk floors, floor boards, portion of the frame
rails, etc. I cannot find the factory measurements for car anywhere. Can
someone please point me in the right direction to obtain these measurements?

thanks,
Chris

--part1_30.188e11d7.289afebd_boundary
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: 7bit

<HTML>I will be replacing the trunk floors, floor boards, portion of the frame
 rails, etc.  I cannot find the factory measurements for car anywhere.  Can
 someone please point me in the right direction to obtain these measurements?
 
 thanks,
 Chris</HTML>

--part1_30.188e11d7.289afebd_boundary--

Reply

Was this post helpful or interesting?

Yes No Thank

'65 Mustang Hardtop Body Measurements #2
mailbot Mail List Archive Bot ., Online, USA	Topic Creator (OP) Aug 2, 2001 05:07 PM Joined 15 years ago 59,279 Posts

This read-only message was archived from a public mail list.
Mail From: (email redacted) (Todd Styles)

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.

------_=_NextPart_001_01C11B8E.9286FA70
Content-Type: text/plain;
charset="iso-8859-1"

i don't have it at work, but i'm sure my factory shop manual has all of
those measurements. do you have the original shop manual?

-----Original Message-----
From: (email redacted) [mailto sad smiley

email redacted)]
Sent: Thursday, August 02, 2001 2:07 PM
To: (email redacted)
Subject: [CM] '65 Mustang Hardtop Body Measurements

I will be replacing the trunk floors, floor boards, portion of the frame
rails, etc. I cannot find the factory measurements for car anywhere. Can
someone please point me in the right direction to obtain these measurements?

thanks,
Chris

------_=_NextPart_001_01C11B8E.9286FA70
Content-Type: text/html;
charset="iso-8859-1"

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">

<META content="MSHTML 5.00.3103.1000" name=GENERATOR></HEAD>
<BODY>
<DIV>i
don't have it at work, but i'm sure my factory shop manual has all of those
measurements. do you have the original shop manual?</DIV>
<BLOCKQUOTE>
<DIV align=left class=OutlookMessageHeader dir=ltr>-----Original Message----- From: (email redacted)
[mailto sad smiley

email redacted)] Sent: Thursday, August 02, 2001 2:07
PM To: (email redacted) Subject: [CM]
'65 Mustang Hardtop Body Measurements </DIV>I will be replacing the trunk floors, floor
boards, portion of the frame rails, etc.  I cannot find the factory
measurements for car anywhere.  Can someone please point me in the
right direction to obtain these measurements? thanks, Chris
</BLOCKQUOTE></BODY></HTML>

------_=_NextPart_001_01C11B8E.9286FA70--

Reply

Was this post helpful or interesting?

Yes No Thank

'65 Mustang Hardtop Body Measurements #3
mailbot Mail List Archive Bot ., Online, USA	Topic Creator (OP) Aug 3, 2001 02:51 PM Joined 15 years ago 59,279 Posts

This read-only message was archived from a public mail list.
Mail From: (email redacted) ((email redacted))

--part1_2b.19348789.289c3e34_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit

No, I don't have the original shop manual.

thanks,
Chris

--part1_2b.19348789.289c3e34_boundary
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: 7bit

<HTML>No, I don't have the original shop manual.
 
 thanks,
 Chris
 
 </HTML>

--part1_2b.19348789.289c3e34_boundary--

Reply

Was this post helpful or interesting?

Yes No Thank

'65 Mustang Hardtop Body Measurements #4
mailbot Mail List Archive Bot ., Online, USA	Topic Creator (OP) Aug 3, 2001 03:21 PM Joined 15 years ago 59,279 Posts

This read-only message was archived from a public mail list.
Mail From: (email redacted) (Todd Styles)

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.

------_=_NextPart_001_01C11C48.E292F770
Content-Type: text/plain;
charset="iso-8859-1"

I can make a copy of the pages you need, but it will be next week. I'm
leaving town this afternoon. the shop manual and supplement wiring diagram
have been very helpful to me. they aren't too expensive last time I checked,
around $35 best I remember. let me know if you need the info.

-----Original Message-----
From: (email redacted) [mailto sad smiley

email redacted)]
Sent: Friday, August 03, 2001 12:50 PM
To: (email redacted)
Subject: [CM] RE: '65 Mustang Hardtop Body Measurements

No, I don't have the original shop manual.

thanks,
Chris

------_=_NextPart_001_01C11C48.E292F770
Content-Type: text/html;
charset="iso-8859-1"

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">

<META content="MSHTML 5.00.3103.1000" name=GENERATOR></HEAD>
<BODY>
<DIV>I can
make a copy of the pages you need, but it will be next week. I'm leaving town
this afternoon. the shop manual and supplement wiring diagram have been very
helpful to me. they aren't too expensive last time I checked, around $35 best I
remember. let me know if you need the info.</DIV>
<BLOCKQUOTE>
<DIV align=left class=OutlookMessageHeader dir=ltr>-----Original Message----- From: (email redacted)
[mailto sad smiley

email redacted)] Sent: Friday, August 03, 2001 12:50
PM To: (email redacted) Subject: [CM]
RE: '65 Mustang Hardtop Body Measurements </DIV>No, I don't have the original shop manual.
 thanks, Chris </BLOCKQUOTE></BODY></HTML>

------_=_NextPart_001_01C11C48.E292F770--

Reply

Was this post helpful or interesting?

Yes No Thank

'65 Mustang Hardtop Body Measurements #5
mailbot Mail List Archive Bot ., Online, USA	Topic Creator (OP) Aug 6, 2001 07:40 AM Joined 15 years ago 59,279 Posts

This read-only message was archived from a public mail list.
Mail From: (email redacted) ((email redacted))

All right, I'm a little slow....where can I get a manual like this?

Erik

Reply

Was this post helpful or interesting?

Yes No Thank

'65 Mustang Hardtop Body Measurements #6
mailbot Mail List Archive Bot ., Online, USA	Topic Creator (OP) Aug 6, 2001 02:38 PM Joined 15 years ago 59,279 Posts

This read-only message was archived from a public mail list.
Mail From: (email redacted) (Todd Styles)

mustangsplus.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=MPF
MP&Product_Code=01838&Category_Code=shop

this is it, you may can find it cheaper though...

www.restoremustangs.com has it for $40
www.emustang.com has it for $37

You could check National Parts Depot, too. The don't have an online catalog
and my hardcopies are at home.

Todd.

-----Original Message-----
From: (email redacted) [mailto sad smiley

email redacted)]
Sent: Monday, August 06, 2001 5:44 AM
To: (email redacted)
Subject: [CM] RE: '65 Mustang Hardtop Body Measurements

All right, I'm a little slow....where can I get a manual like this?

Erik
_______________________________________________
Classic-mustangs mailing list
(email redacted)
mix.twistedpair.ca/mailman/listinfo/classic-mustangs

Reply

Was this post helpful or interesting?

Yes No Thank

'65 Mustang Hardtop Body Measurements #7
mailbot Mail List Archive Bot ., Online, USA	Topic Creator (OP) Aug 7, 2001 03:28 PM Joined 15 years ago 59,279 Posts

This read-only message was archived from a public mail list.
Mail From: (email redacted) ((email redacted))

--part1_e2.18ace1f1.28a18d00_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit

This shop manual does have chasis measurements??? I looked through one for a
'66 Mustang at a show recently, and I could not find measurements. I did see
schematics but no measurements.

thanks,
Chris

--part1_e2.18ace1f1.28a18d00_boundary
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: 7bit

<HTML>This shop manual does have chasis measurements???  I looked through one for a
 '66 Mustang at a show recently, and I could not find measurements.  I did see
 schematics but no measurements.
 
 thanks,
 Chris
 </HTML>

--part1_e2.18ace1f1.28a18d00_boundary--

Reply

Was this post helpful or interesting?

Yes No Thank

'65 Mustang Hardtop Body Measurements #8
mailbot Mail List Archive Bot ., Online, USA	Topic Creator (OP) Aug 7, 2001 08:12 PM Joined 15 years ago 59,279 Posts

This read-only message was archived from a public mail list.
Mail From: (email redacted) (Todd Styles)

This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.

------_=_NextPart_001_01C11F96.50951EB0
Content-Type: text/plain;
charset="iso-8859-1"

Section 17-7, Figure 5 in my '65 shop manual, "Mustang Underbody
Dimensions". Two views, one overhead and one profile. It's only one page
and easy to overlook. Todd.

-----Original Message-----
From: (email redacted) [mailto sad smiley

email redacted)]
Sent: Tuesday, August 07, 2001 1:27 PM
To: (email redacted)
Subject: [CM] RE: '65 Mustang Hardtop Body Measurements

This shop manual does have chasis measurements??? I looked through one for
a
'66 Mustang at a show recently, and I could not find measurements. I did
see
schematics but no measurements.

thanks,
Chris

------_=_NextPart_001_01C11F96.50951EB0
Content-Type: text/html;
charset="iso-8859-1"

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">

<META content="MSHTML 5.00.2614.3500" name=GENERATOR></HEAD>
<BODY>
<DIV>Section 17-7, Figure 5 in my '65 shop manual, "Mustang
Underbody Dimensions". Two views, one overhead and one profile.  It's only
one page and easy to overlook.  Todd.</DIV>
<BLOCKQUOTE>
<DIV align=left class=OutlookMessageHeader dir=ltr>-----Original Message----- From: (email redacted)
[mailto sad smiley

email redacted)] Sent: Tuesday, August 07, 2001 1:27
PM To: (email redacted) Subject: [CM]
RE: '65 Mustang Hardtop Body Measurements </DIV>This shop manual does have chasis
measurements???  I looked through one for a '66 Mustang at a show
recently, and I could not find measurements.  I did see schematics
but no measurements. thanks, Chris
 </BLOCKQUOTE></BODY></HTML>

------_=_NextPart_001_01C11F96.50951EB0--

Reply

Was this post helpful or interesting?

Yes No Thank

Classic Mustangs List Archive

'65 Mustang Hardtop Body Measurements

Sorry, you can't reply to this topic. It has been closed.