Classic Mustangs List Archive

This read-only message was archived from a public mail list.
Mail From: dave (David Sutton)

Hello,

My first post - hopefully I am doing this right !

I have a 69 Mustang, 351W, FMX auto - with an Edelbrock Performer RPM
intake, and 1406 carb. My question is - does anyone have this combo (or
similar), and if so could you send me a picture of how you did your throttle
cable bracket ? I have the Edelbrock 1483 and 1491 bracket - the 1483 is on
no problem but I am at a loss as to how to put the 1491 on. My original set
up was the 351W, stock intake, and 2v carb - the original throttle cable
bracket sat across the rear of the carb and mounted to it's two rear-most
studs.

Any help would be appreciated !

Thanks,
Dave

This read-only message was archived from a public mail list.
Mail From: mach70 (mark thispot)

Dave,
I have the same setup except the standard Performer intake. I use a stock
bracket mounted to the intake bosses behind the carb. This pic might
provide you with the details you need:
mywebpages.comcast.net/mburnette/Distributor_15Apr02.JPG
If you need more specific shots, let me know.

Mark
70Mach1
351W
FMX

>Date: Sun, 24 Jul 2005 12:11:27 -0400
>From: "David Sutton" <(email redacted)>
>Subject: [CM] 351W with Edelbrock throttle bracket HELP
>To: <(email redacted)>
>Message-ID: <018401c5906a$58cbc6d0$6401a8c0@dell8200>
>Content-Type: text/plain; format=flowed; charset="Windows-1252";
> reply-type=original
>
>Hello,
>
>My first post - hopefully I am doing this right !
>
>I have a 69 Mustang, 351W, FMX auto - with an Edelbrock Performer RPM
>intake, and 1406 carb. My question is - does anyone have this combo (or
>similar), and if so could you send me a picture of how you did your
>throttle
>cable bracket ? I have the Edelbrock 1483 and 1491 bracket - the 1483 is
>on
>no problem but I am at a loss as to how to put the 1491 on. My original
>set
>up was the 351W, stock intake, and 2v carb - the original throttle cable
>bracket sat across the rear of the carb and mounted to it's two rear-most
>studs.
>
>Any help would be appreciated !
>
>Thanks,
>Dave

This read-only message was archived from a public mail list.
Mail From: dave (David Sutton)

H Mark,

Thanks very much - if you have a moment would you be able to take a picture
of yours that is like the attached ? I took this pic with the air cleaner
off, at the rear/side of the carb where the throttle cable bracket is
located.

This is my current set-up - hacked up factory bracket. It works, but the
accelerator pedal is too high.

thanks again,
Dave


----- Original Message -----
From: "mark thispot" <(email redacted)>
To: <(email redacted)>
Sent: Monday, July 25, 2005 12:22 PM
Subject: [CM] RE: 351W with Edelbrock throttle bracket HELP


> Dave,
> I have the same setup except the standard Performer intake. I use a stock
> bracket mounted to the intake bosses behind the carb. This pic might
> provide you with the details you need:
> mywebpages.comcast.net/mburnette/Distributor_15Apr02.JPG
> If you need more specific shots, let me know.
>
> Mark
> 70Mach1
> 351W
> FMX
>
>>Date: Sun, 24 Jul 2005 12:11:27 -0400
>>From: "David Sutton" <(email redacted)>
>>Subject: [CM] 351W with Edelbrock throttle bracket HELP
>>To: <(email redacted)>
>>Message-ID: <018401c5906a$58cbc6d0$6401a8c0@dell8200>
>>Content-Type: text/plain; format=flowed; charset="Windows-1252";
>> reply-type=original
>>
>>Hello,
>>
>>My first post - hopefully I am doing this right !
>>
>>I have a 69 Mustang, 351W, FMX auto - with an Edelbrock Performer RPM
>>intake, and 1406 carb. My question is - does anyone have this combo (or
>>similar), and if so could you send me a picture of how you did your
>>throttle
>>cable bracket ? I have the Edelbrock 1483 and 1491 bracket - the 1483 is
>>on
>>no problem but I am at a loss as to how to put the 1491 on. My original
>>set
>>up was the 351W, stock intake, and 2v carb - the original throttle cable
>>bracket sat across the rear of the carb and mounted to it's two rear-most
>>studs.
>>
>>Any help would be appreciated !
>>
>>Thanks,
>>Dave
>
>
> _______________________________________________
> Classic-mustangs mailing list
> (email redacted)
> lists.twistedpair.ca/mailman/listinfo.cgi/classic-mustangs
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 69 Mustang Engine June 30 2005 009 (Small).jpg
Type: image/jpeg
Size: 69367 bytes
Desc: not available
Url : lists.twistedpair.ca/pipermail/classic-mustangs/attachments/20050725/1e95f31e/69MustangEngineJune302005009Small-0001.jpg