Classic Mustangs List Archive
1966 Ranchero 289 A/C to a 1966 Must. GT 289
Posted by mailbot
|
mailbot
Mail List Archive Bot
., Online, USA
|
Topic Creator (OP)
Feb 14, 1999 08:58 PM
Joined 15 years ago
59,279 Posts
|
This read-only message was archived from a public mail list.
Mail From: (email redacted) (email redacted)
I just bought an a/c system with radiator that came from a 1966 Ford Ranchero
with a 289. The seller thought the radiator/plus dryer would fit on top of my
existing radiator, but it does not it is too wide. I am concered that the
rest of the parts will not fit either. Does anyone know if the compressor and
the blower that goes under the dash is the same as the ones that were in the
Mustangs.
Thanks,
Rolland Fellows
Austin, Tx.
------------------------------------------------------------------------
All the list info you'll ever want: antler.moose.to/~server/cm
Mail From: (email redacted) (email redacted)
I just bought an a/c system with radiator that came from a 1966 Ford Ranchero
with a 289. The seller thought the radiator/plus dryer would fit on top of my
existing radiator, but it does not it is too wide. I am concered that the
rest of the parts will not fit either. Does anyone know if the compressor and
the blower that goes under the dash is the same as the ones that were in the
Mustangs.
Thanks,
Rolland Fellows
Austin, Tx.
------------------------------------------------------------------------
All the list info you'll ever want: antler.moose.to/~server/cm
|
mailbot
Mail List Archive Bot
., Online, USA
|
Topic Creator (OP)
Feb 15, 1999 12:25 AM
Joined 15 years ago
59,279 Posts
|
This read-only message was archived from a public mail list.
Mail From: Mark Dixon (email redacted)
Don't know about the compressor, but the underdash unit is the same.
Good Luck
Mark Dixon
Capital Classics
Canberra
Website :"capitalclassics.cyberone.com.au"
-----Original Message-----
From: (email redacted) <(email redacted)>
To: (email redacted) <(email redacted)>
Date: Monday, February 15, 1999 2:20 PM
Subject: [CM:15913] 1966 Ranchero 289 A/C to a 1966 Must. GT 289
>I just bought an a/c system with radiator that came from a 1966 Ford
Ranchero
>with a 289. The seller thought the radiator/plus dryer would fit on top of
my
>existing radiator, but it does not it is too wide. I am concered that the
>rest of the parts will not fit either. Does anyone know if the compressor
and
>the blower that goes under the dash is the same as the ones that were in
the
>Mustangs.
>
>Thanks,
>Rolland Fellows
>Austin, Tx.
>
>------------------------------------------------------------------------
>All the list info you'll ever want: antler.moose.to/~server/cm
>
------------------------------------------------------------------------
All the list info you'll ever want: antler.moose.to/~server/cm
Mail From: Mark Dixon (email redacted)
Don't know about the compressor, but the underdash unit is the same.
Good Luck
Mark Dixon
Capital Classics
Canberra
Website :"capitalclassics.cyberone.com.au"
-----Original Message-----
From: (email redacted) <(email redacted)>
To: (email redacted) <(email redacted)>
Date: Monday, February 15, 1999 2:20 PM
Subject: [CM:15913] 1966 Ranchero 289 A/C to a 1966 Must. GT 289
>I just bought an a/c system with radiator that came from a 1966 Ford
Ranchero
>with a 289. The seller thought the radiator/plus dryer would fit on top of
my
>existing radiator, but it does not it is too wide. I am concered that the
>rest of the parts will not fit either. Does anyone know if the compressor
and
>the blower that goes under the dash is the same as the ones that were in
the
>Mustangs.
>
>Thanks,
>Rolland Fellows
>Austin, Tx.
>
>------------------------------------------------------------------------
>All the list info you'll ever want: antler.moose.to/~server/cm
>
------------------------------------------------------------------------
All the list info you'll ever want: antler.moose.to/~server/cm
Sorry, you can't reply to this topic. It has been closed.
Having trouble posting or changing forum settings?
Read the Forum Help (FAQ) or click Contact Support at the bottom of the page.



